Well-known companies cutting discs can choose Surefaith stable, stainless steel slicing] [Tianjin, Jinan steel sections can be provided by the stable steady letter. We are Tianjin Surefaith stability can Abrasives Co., Ltd. (www.tjwxwk.com) in: Tianjin professional: grinding, cutting, angle grinding, 100 leaves, etc. [Tianjin Surefaith limited stability can be abrasive abrasive Company to promote your product ---- star cut diamond thin film] is mainly used for precision cutting wheels cut stainless steel tanks and sliced ??close wholesale, generally use deep creep feed grinding method. With grinding depth, feed small speed, large contact area of ??the grinding wheel and the workpiece, narrow kerf, metal removal rate, high grinding precision, good surface quality and material utilization characteristics. The general rule is as follows: 1) the overall thickness of the thin cutting wheel type (mostly in 0.5mm or less), small diameter (20-100mm), fine granularity, high dimensional and geometric precision, light weight, high speed conditions in general to use. Average speed is 5000-40000rpm. 2). Cutting wheel base body mostly thick (0.5-2mm), diameter (100-200mm), coarse granularity, low accuracy, generally used for low speed large depth of cut conditions. Average speed of 3000-10000rpm. [Tianjin Surefaith steady Abrasives Co., you can promote star products ---- cutting discs] 3). Thin cutting wheel to use more fine-grained, and generally having a thickness thinner grit size will correspondingly thinner, surface good quality. However, the finer the particle size of the abrasive cutting sharpness drop corresponding to the feed rate is reduced accordingly to adapt the particle size of the abrasive machinability. 4) ultra-thin cutting wheel cutting depth is generally by the user to set the cutting parts, which mostly uses cutting creep feed grinding process, the depth of a cut to the. Because so thin cutting wheel, cutting conditions are poor (mostly 3 face contact with the workpiece) Tianjin stainless steel slicing, slice stainless steel cooling difficulties it therefore should increase (flow, pressure) cooling the cutting area. 5) When the cutting wheel at the user has just appeared on the machine does not move or cut the workpiece chipping, the proposal to increase the cutting speed or decrease feed rate; When the cut after a period of time does not move or chipping, it is recommended to use Whetstone appropriate granularity on the surface of the blade wheel to adjust its sharpness.